View and Download AMMCO installation instructions manual online. Disc Rotor Lathe. Lathe pdf manual download. iv • AMMCO Brake Lathes. Safety. Safety Notices and. Decals. For your safety, and the safety of others, read and understand all of the safety notices and . Get AMMCO Disc Rotor Lathe Manual. Get all AMMCO manuals!.
|Published (Last):||18 August 2007|
|PDF File Size:||2.70 Mb|
|ePub File Size:||15.44 Mb|
|Price:||Free* [*Free Regsitration Required]|
Enter text from picture: Tell us about it.
Your manual failed to upload Retighten the arbor nut. 77000 all guards, shields, and covers in place and in working order. Page 14 Turn the left hand tool bit control until the tool bit contacts the rotor surface and makes a scratch cut no deeper than.
Move the belt to the pulley groove that will give the correct spindle speed for the cut to be taken, Fig. Witness marks have been etched onto the arbor and spindle for repeatable, precise alignment. Replace or repair damaged or worn cords immediately soon as it is received. Got it, ammcoo to print.
What’s missing? Tell us about it.
The cross feed xmmco control adjusts the feed rate from. Use a micrometer to check the thickness of the rotor at no less than three points around the circumference about 1″ This is easily done by stretching the band to its full length and then wrapping it around the rotor and hooking the end metal loop over a lead weight, Fig. Page 19 Brake Lathes Care of Arbors and Adapters CAUTION Although the adapters, arbors, and the spindle ammfo made of top grade steel and are turned, hardened, and precision ground to close tolerances, great care should be taken in their use, handling, and storage.
Read entire manual before installing, operating, or servicing this equipment. Generally, finish cuts should be.
AMMCO PARTS & INFO
KEEP these and other materials deliv ered. Every hours drain the oil and refill to the dipstick level with clean EP gear oil.
Refill as necessary with EP gear oil and check the oil level often. Or point us to the URL where the manual is located. Brake Lathes Machining 8. Proper maintenance and inspection is necessary for safe operation. Don’t have an account? Oiling Amco lathe is shipped from the factory with the correct amount and type of oil.
The signed bill of lading is acknowledgement by the carrier of receipt in good condition of shipment covered by our invoice. Reset the collars if necessary. Clean, repair, remount, or replace as necessary. Brake Lathes Care of Arbors and Adapters CAUTION Although the adapters, arbors, and the spindle are made of top grade steel and are turned, hardened, and precision ground to close tolerances, great care should be taken in their use, handling, and storage.
Move the tool bits inward until they just contact the faces of the rotor.
AMMCO 7000 Disc Rotor Lathe User Manual
READ these instr uctions bef ore placing unit in. Page 4 Safety Safety Notices and Decals For your safety, and the safety of others, read and understand all of the safety notices akmco decals included here and on the unit. KEEP these and other materials delivered with the unit in a binder near the machine for ease of reference by supervisors and operators.
Unplug unit from power source before servicing or adjusting. Reconditioning Disc Brake Rotors The patented self-aligning spacer prevents diagonal thrust on the adapters.
Feed Speed – Feed speed refers to the number of thousandths of an inch the cutting tools move across the face of the rotor per revolution of the spindle. By pressing ‘print’ button you will print only current page. Brake Lathes Maintenance and Service Note: B 10, and adjust the twin cutter so that the rotor is centered between the tool bits. Give the rotor a full turn by hand and ammxo the lathe.
Adjust the drive belt to match the rotor size.
Spindle Speed – Release the belt tension by moving the V-belt adjusting lever clockwise, Fig. To drain the oil, remove the socket head drain plug located on the front of the lathe to the right of zmmco cross feed assembly, Fig. Center the twin cutter to the rotor. Tell us what’s missing.